phono accessory moving coil stylus catridge


540338 540338 540338 540338
instead 459,90EUR only 436,90EUR
incl. 19 % Tax

Audio Technica AT 33 Mono MC Pickup

The AT33Mono is our custom-made mono playback. The idea: The use of a single, horizontally oriented coil only detects the lateral deflection of the groove - minimizing disturbing vertical deflections, as occurs in the case of scratched or heavily worn panels.
Correspondingly, the AT33MONO has a sound control that is impossible to achieve with a stereo system.
Of course, the AT33Mono has enough travel in the vertical axis to prevent damage to stereo disks. Experience the sound of the AT33 Mono from its historic mono-vinyl.

  • Stereo compatible mono system
  • Elliptical needle base with robust duralum needles
  • Coherent 10O design.
  • Single, horizontal-oriented PCOCC coil - insensitive to vertical deflection.
  • Torsionally rigid construction thanks to solid base plate.
  • "Hanenite" anti-vibration rubber dampens disturbing vibrations.
  • Excellent sound
Technical specifications
  • Profile: MC (Moving Coil)
  • Frequency range: 20-20,000Hz
  • Output voltage: 0.35mV (1kHz and 5cm / sec horizontal signal)
  • H / V output ratio: 30dB (1kHz)
  • Output Voltage: 1.0dB (1kHz)
  • Holding Force: 2.3-2.7g (2.5g Standard)
  • Impedance of coil: 10 ohms 1kHz
  • DC resistance: 10 ohms
  • Recommended terminating resistor:> 100 Ohm (with preamplifier connected)
  • Impedance of the coil: 28?H (1kHz)
  • Static needle compliance: 20 × 10-6cm / dyne
  • Dynamic Needle Compliance: 6 × 10-6cm / dyne (100Hz)
  • Sample Diamond: Round (0.65 mil)
  • Needle support: Duralumin shaft
  • Sampling angle: 23 °
  • Dimensions: H16 × B16.6 × T26.5mm
  • Weight: 6.9g
  • Scope of delivery: Antistatic screwdriver x1, washer x2, protective sleeve x1, brass mounting screw 13mm × 2, 19mm × 2, nut x2, brush x1, PCOCC connection set x1
Not compatible with shellac plates!
* Prices incl. 19 % Tax excl. Shipping costs, ** suggested retail price
© 2018 Rö-HiFi GmbH